Technical Specifications - Go-Video DHT7000 User Manual

Go-video digital home theater system, complete with a dvd player, am/fm receiver and built-in amplifier user's guide dht7000
Hide thumbs Also See for DHT7000:
Table of Contents

Advertisement

Disc plays automatically.
• The DVD features an auto playback function.
Playback stops automatically.
• Some discs contain an auto pause signal. While playing such a disc, the system stops playback at the auto
Cannot perform certain func-
• Depending on the disc, some operations may not be available. See the documentation that came with the disc.
tions, such as Stop, Search,
Slow Motion Play, Repeat Play,
or Program Play.

:: Technical Specifications

Amplifier Section
Stereo Mode
40W + 40W (6Ω at 1 kHz, THD 10%)
Surround Mode
Front: 40W + 40W; Center: 40W; Rear: 40W + 40W (6Ω at 1kHz, THD 10%); Subwoofer: 66W; Note:
Depending on the sound field settings and the source, there may be no sound output from Center, Rear or Subwoofer channels.
Inputs (Analog)
VIDEO 1,2 - Sensitivity: 200mV; Impedance: 50 kΩ
Outputs (Analog)
VIDEO 2 (AUDIO OUT) - Voltage: 2V; Impedance: 1 kΩ
Outputs (Digital)
OPTICAL OUT (CD) - Level: -18dBm
DVD System
Laser
Semiconductor laser
Signal Format System
Frequency response
Signal-to-noise ratio
Harmonic distortion
FM Tuner Section
System
PLL quartz-locked digital synthesizer system
Tuning range
87.5 – 108.0MHz (100kHz step)
Antenna
FM wire antenna
Antenna terminals
75Ω, unbalanced
Intermediate frequency
pause signal.
NTSC
at 2 CH STEREO mode - DVD (PCM): 20Hz to 20kHz (6 1.0dB); CD: 20Hz to 20kHz (6 0.5dB)
More than 80dB (VIDEO 1 (AUDIO) connectors only)
Less than 0.1%
10.7MHz
35

Advertisement

Table of Contents
loading

Table of Contents

Save PDF