Teac CRX-300i Owner's Manual page 19

Checking the alarm time:
Press the DISPLAY/MEMORY button repeatedly to change the display
in the sequence -
Alarm 1 time check.
The Alarm 1 indicator will light and the Alarm 1 time setting will be displayed.
Alarm 2 time check.
The Alarm 2 indicator will light and the Alarm 2 time setting will be displayed.
Return to time/date display.
NOTE: The time check displays will cancel after 5 seconds.
Setting the alarm to wake you:
Press the ALARM button repeatedly to set Alarm 1, Alarm 2 or both
alarms to wake you as required or to .
Press the ALARM button repeatedly to scroll through the wake-up
options on the display -
Alarm 1 activated
Alarm 2 activated
Alarm 1 & 2 activated
No alarms activated
The indicators shown next to each option will light on the display to
confirm the mode that is set.
IMPORTANT NOTES:
Remember to set the unit to Standby before going to bed.
If you have chosen FM radio as wake-up mode, remember to tune to
a station.
If you have chosen iPod as wake-up mode, remember to dock your
iPod and set the volume to a level that will wake you before going to
bed. If you forget to dock your iPod and the alarm is set, the unit will
automatically wake you with a buzzer.
WHEN THE ALARM WAKES YOU
The alarm will sound at your preset time and the Alarm Mode display
will flash. You can then choose to set snooze, which will temporarily
reset the alarm for a further 10 minutes, or to switch it off.
17