Using The Alarms - Teac CRX-300i Owner's Manual

Playing the AUDIO source
Press the INPUT button repeatedly to select AUX mode.
The AUX symbol will be displayed.
Set your personal audio player/computer to PLAY.
Set the listening volume to the level you want with the volume controls
on the radio or remote control.
If there is no sound or if the volume level is not loud enough, you may
need to increase the volume setting on your personal audio player.
NOTE:- The volume control of the iPod must be turned up when playing
through the AUDIO IN jack.
NOTE:- An iPod connected to the AUDIO IN jack cannot be operated
from the controls of your clock radio.

USING THE ALARMS

Your clock radio has two alarms (Alarm 1 and Alarm 2). You can set
either or both alarms to wake you at your preferred time and choose to
wake up to the sound of radio, music from an iPod or a buzzer.
Setting the Alarm 1 alarm time:
Press and hold the ALARM button.
The Alarm 1 indicator will light and the hours digit will flash.
1. Press the /SET+ or
2. Press the /ENTER button to confirm this setting.
The minutes digits will flash.
3. Press the /SET+ or
4. Press the /ENTER button to confirm this setting.
The current alarm wake-up mode will flash.
5. Press the /SET+ or
you want from the options of - FM, iPod or Buzzer.
6. Press the /ENTER button to confirm this setting.
Alarm 1 time has been set.
Setting the Alarm 2 alarm time:
Press and hold the ALARM button.
The Alarm 1 indicator will light and the hours digit will flash.
Press the ALARM button briefly.
The Alarm 2 indicator will light and the hours digit will flash.
Follow steps 1 - 6 above to set the Alarm 2 hour, minute and Alarm
mode.
/SET- button to set the correct alarm hour.
/SET- button to set the correct alarm minutes.
/SET- button to select the wake-up mode
16