Adjusting The Volume; Listening To Fm Radio - Teac CRX-300i Owner's Manual

Selecting a source:
Press the INPUT button on the top panel repeatedly to scroll through
the available sources.
The symbol for the selected source will light on the display.

ADJUSTING THE VOLUME

To increase the volume:
Press the VOLUME + button on the top of the unit.
To decrease the volume:
Press the VOLUME - button on the top of the unit.
When the volume is adjusted, the display will change to show the current
volume level setting on a scale of 00 (minimum) to 30 (maximum).

LISTENING TO FM RADIO

To listen to FM radio:
Press the INPUT button repeatedly to select FM mode.
The 'FM' mode indicator will light, the radio will play and the display will
show the tuned frequency.
After a few seconds, the display will revert to show the time unless you
change any FM settings, for example, re-tuning.
To auto-tune to FM stations
Press and hold the
down the band.
The radio will search in the direction indicated and the tuning frequency
will be displayed whilst searching.
When a usable station is detected the radio will stop tuning and play the
station.
To manually tune to FM stations
Press the /SET + or
manually in 100KHz steps.
STEREO/MONO RECEPTION
When receiving a strong, good quality, FM stereo signal your radio will
switch automatically to stereo reception.
The FM stereo symbol will be displayed.
When receiving weaker or FM mono signals, your radio will switch to mono
reception.
The FM stereo symbol will not be displayed.
/SET+ or /SET- button to auto-tune up or
/SET - button briefly to tune the band
11