Teac CRX-300i Owner's Manual page 15

iPod ADAPTERS
Before docking your iPod you must
first check if your iPod has a docking
connector. Early iPod models do not
have one and cannot be docked to
your unit. The docking connector is
located on the base of the iPod as
shown right.
Before docking your iPod, you must
first fit the correct iPod adapter to
the docking bay. Each iPod adapter
matches the shape of a particular iPod
and is necessary to ensure that your
iPod is securely held when docked.
Fitting the iPod adapter
When your iPod was new it may have been supplied with a standard
dock adapter in the packaging. If so, fit the adapter by pressing it gently
into the Docking Bay as shown above.
NOTE: Do not dock an iPod without fitting the correct adapter, you may
damage the iPod and your unit.
Use this insert
NOTE: When inserting an iPhone/iPod Touch into the CRX-300i, make
sure the correct adapter is used. The adapter should have been supplied
with the Apple product. If otherwise, the adapter can be purchased from
Apple stores or Apple web-site(
CHARGING AN iPod
When an iPod is docked, the iPod will begin to charge automatically and
will continue to charge when the unit is set to Standby.
For iPhone/iPod
insert 15 iPhone 3G/3GS
insert 16 iPod touch 2G
insert 17
http://support.apple.com/kb/HT1353)
13
Docking Connector
iPod adapter
Docking bay
nano 4G
.