Setting The Dab Waveband; Switching Between Dab And Fm - Blaupunkt WOODSTOCK DAB52 Operating Instructions Manual

DAB MODE

Setting the DAB waveband

With the Woodstock DAB52 you can
receive DAB stations and ensembles on
the following wavebands: "Band III"
(174 - 240 MHz) and "L-Band" (1452 -
1492 MHz). Since some countries do
not use both wavebands, you can speed
up seek tuning by excluding the unsup-
ported waveband.
Press the MENU button 8.
Keep pressing the
: until "DAB BAND" appears in
the display.
Press the or
switch between "BAND L", "BAND
III" and "BOTH".
If "BAND L" or "BAND III" are set, only
the selected waveband will be used. If
"BOTH" is set, both wavebands will be
used.
Press the MENU button 8 or OK
;.
Note:
If the region is set to "AREA CANADA",
only "BAND L" is available.
54
or button
button : to

Switching between DAB and FM

You can select various settings for
switching between the DAB and FM
radio modes It might be necessary to
switch from DAB to FM radio if DAB re-
ception quality decreases severely.
If you select the "DAB-FM-AUTO" set-
ting, the unit automatically tunes into the
FM frequency of the station currently
being received (in so far as the station
is receivable on FM). If "DAB-FM-MAN"
is set, the unit tunes into the FM fre-
quency of the received DAB station as
soon as you manually switch to FM ra-
dio mode (in so far as the station is re-
ceivable on FM). If you set "DAB-FM-
OFF", the FM station that you listened
to last will be played when you switch
to FM radio mode (in so far as the sta-
tion can be received).
Press the MENU button 8.
Keep pressing the
: until "DAB-FM" appears in the
display.
Press the or
switch between settings.
Press the MENU button 8 or OK
; twice.
or button
button : to