Accessing Stored Programmes; Setting The Country/Region; Setting The Dab Waveband - Blaupunkt Woodstock DAB 53 Operating Instructions Manual

DAB MODE
Storing programmes automatically
(Travelstore)
You can automatically store the first five
programmes of the current ensemble in
the "DT" memory bank.
Note:
Any programmes that were previ-
ously stored in this memory bank
are deleted in the process.
Press and hold down the DAB•TS
button 4 for longer than two sec-
onds.
The storing procedure begins. "TRAV-
EL STORE" appears in the display. Af-
ter the process is completed, the pro-
gramme that is stored in location 1 in
the "DT" memory bank will be played.

Accessing stored programmes

Select the memory bank.
Press the station button 1 - 5 >
that corresponds to the programme
you require.

Setting the country/region

You must set your location in the de-
vice's menu to either Europe or Cana-
da. If you are operating the device in
Europe, you
"EUROPE". If you do not do this, you
might not be able to receive any DAB
ensembles or programmes.
Press the MENU button 8.
Keep pressing the
: until "AREA EUROPE" or
"AREA CANADA" appears in the
display.
58
must always
or button
Press the
switch between "EUROPE" and
"CANADA".
Press the MENU button 8 or OK
;.

Setting the DAB waveband

With the Woodstock DAB53, you can
receive DAB programmes and ensem-
bles on the following wavebands: "Band
III" (174 - 240 MHz) and "L-Band" (1452
-1491 MHz). Since some countries do
not use both wavebands, you can speed
up seek tuning by excluding the unsup-
ported waveband.
Press the MENU button 8.
Keep pressing the
: until "DAB BAND" appears in
the display.
Press the
switch between "BAND L", "BAND
III" and "BOTH".
If "BAND L" or "BAND III" are set, only
the selected waveband will be used. If
"BOTH" is set, both wavebands will be
used.
Press the MENU button 8 or OK
;.
set
Note:
If the region is set to "AREA
CANADA", only "BAND L" is
available.
button : to
or
or button
button : to
or