Important Information - Blaupunkt WOODSTOCK DAB52 Operating Instructions Manual

Important information

Important changes were made to this
device after the accompanying operat-
ing instructions went to press. These
changes were introduced to make the
unit even easier to operate. Please read
this additional sheet and the operating
instructions carefully before using the
unit for the first time, and keep them in
a safe place!
DAB mode
The DAB radiotext function is activated
at the factory by default. Since display-
ing radiotexts can distract you from the
current road and traffic situation, we ask
you to deactivate the "DAB radiotext"
function or to only use it whilst the vehi-
cle is stationary. Please refer to page
55 of the operating instructions for in-
formation on how to deactivate this func-
tion.
Traffic information
DAB-FM traffic information
source (P. 62)
In order to simplify operation of the unit,
the function that allows the user to
switch traffic information sources has
been removed from the menu. The de-
vice always automatically switches to
an incoming traffic announcement be-
ing broadcast via DAB (in DAB mode)
or FM (in radio mode). In AUX, Com-
pact Drive MP3, MMC, CD and CD
changer mode, traffic announcements
from the source that was active last (ei-
ther DAB or radio) will be played.
IMPORTANT INFORMATION
MP3 and MMC mode
Preparing the MP3-CD or MMC
(P. 66)
A maximum of 127 directories in 8 di-
rectory levels can be stored on MP3-
CDs.
In order to optimise access to MMCs,
you should store no more than 20 di-
rectories and a maximum of 200 files
on an MMC.
Programming your favourite
tracks (TPM) for an MP3-CD /
MMC (P. 69, P. 72)
Switching TPM on/off
To switch the TPM function on/off,
keep pressing button 1 > until
"TPM ON" or "TPM OFF" appears
in the display.
If no tracks are programmed, an appro-
priate notice will be displayed.
Deleting individual tracks from a list
You can delete individual tracks from a
list of favourite tracks.
Listen to the track that you want to
delete from the list.
Press the
Press and hold button 2 > for
longer than four and less than
eight seconds until you hear a con-
firmation beep.
button :.
or
1