Ford C-MAX Owner's Handbook Manual page 103

2008
Hide thumbs Also See for C-MAX:
Table of Contents

Advertisement

To programme the auxiliary heater,
scroll to this display using the rotary
control and press the SET/RESET
button.
Instant control
To switch on the programmable
auxiliary heater or fuel operated
heater, scroll to this display and press
SET/RESET. The cursor will change
to a tick. The tick in this display
confirms that the heater is now
activated and will perform one
heating cycle.
AUX. HEATER ON will appear in
the display.
To switch off the programmable
auxiliary heater or fuel operated
heater during a heating cycle, scroll
to this display and press
SET/RESET. The cursor will change
to a tick. The tick in this display
confirms that the heater is now
deactivated.
AUX. HEATER OFF will appear in
the display.
Programme times
Note: The programmed time is the
time at which you wish the vehicle to
be warm and ready to drive, not the
time at which the heater switches on.
Note: Times must be programmed
at least 70 minutes in advance of the
time you wish to set.
Note: The time and date must be
correctly set on the audio/ navigation
system or on the information display.
See Clock setting.
Information displays
Four functions are available for
setting the times at which the vehicle
should be warmed up:
Seven days in the week
One or two times can be
programmed for every day of the
week.
Five days in the week
One or two times can be
programmed for the days Monday
to Friday.
Single day within week
One or two times can be
programmed for one particular day
of the week.
Any time and date
One time can be programmed for
one particular day in the next 12
months from the date of
programming.
Programming procedure for
Seven days in the week, Five
days in the week, Single day
within week:
In the Auxiliary heater
programming menu, scroll to the
relevant display using the rotary
control and press the SET/RESET
button.
When programming the function
Single day within week, choose
the day using the rotary control and
press SET/RESET.
The first programme time will flash.
Press SET/RESET and the hours
will flash.
101

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents