Helmet Holder - Honda PCX Owner's Manual

10/02/17 16:56:53 32KWN600_071

HELMET HOLDER

The helmet holder ( ) is on the left side 1
below the seat. The helmet holder is
designed to secure your helmet while
parked.
Open the seat (page 47
Route the helmet wire ( ) through the
helmet D-ring ( ) and hook the loops of the 3
helmet wire onto the helmet holder.
Close the seat and lock it securely.
The helmet wire is furnished in the tool kit
(page 91 ).
(2)
(1) Helmet holder
(2) Helmet wire
Riding with a helmet attached to the
holder can interfere with the rear wheel
). or suspension and could cause a
2
crash in which you can be seriously
hurt or killed.
Use the helmet holder only while
parked. Do not ride with a helmet
secured by the holder.
(1)
(3)
(3) D-ring
61