Honda PCX Owner's Manual page 114

10/02/17 17:01:08 32KWN600_114
2. Disconnect the spark plug cap ( ) from
the spark plug.
3. Clean any dirt from around the spark plug
base.
Remove the spark plug using a spark plug
wrench furnished in the tool kit.
(3)
(3) Spark plug cap
104
3 4. Inspect the electrodes and center
porcelain for deposits, erosion or carbon
fouling. If the erosion or deposit is heavy,
replace the plug. Clean a carbon or wet-
fouled plug with a plug cleaner, otherwise
use a wire brush.
5. Check the spark plug gap (
wire-type feeler gauge. If adjustment is
necessary, bend the side electrode (
carefully.
The gap should be:
0.80 0.90 mm (0.031 0.035 in)
(4)
(4) Spark plug gap
4 ) using a
5 )
(5)
(5) Side electrode