Table of Contents
Advertisement
MICRO1468I.book Page 13
Using the CD
Programmed MP3 playback
DON'T FORGET! The MP3 disc must be in
stop mode.
1
Press the C-ADJ/MEMORY or MEMORY
button. The following information will
show in the display.
Press the SKIP/TUNE buttons to select
2
the folder. Press the C-ADJ/MEMORY
or MEMORY button to confirm the folder.
To select the track, press the SKIP/TUNE
3
buttons.
Press the C-ADJ/MEMORY or MEMORY
4
button to confirm the track.
5
Repeat the steps 2 to 4 to select the next
folder and track to be programmed.
6
Continue entering the tracks in this way
until all the desired track are stored (up to
a limit of 99).
When the C-ADJ/MEMORY or MEMORY
button is pressed to store the 99th track,
it will show "FUL" on the display.
DON'T FORGET! If the PLAY/PAUSE button
is pressed before the C-ADJ/MEMORY
button is pressed, that track will not be
programmed, and the disc will start playing
from the first programmed track. Any track
can be programmed to play more than once.
Listening to programmed MP3 tracks
1
Press the PLAY/PAUSE button.
2
Disc play will start at the beginning of the
first programmed track.
To Clear the Program Memory
If the disc is playing, press the STOP button
twice, or Select IPOD, AUX or TUNER to clear
the program.
04
13
Advertisement
Table of Contents
