Switch And Indicators; Operation And Use; Installation; Adjusting The Temperature - Electrolux TG 080 N10 User Manual

Refrigerator-freezer combination
Table of Contents

Advertisement

Switches and indicators
A) On/off indicator
B) Thermostat and on/off switch
C) Quick freeze indicator
D) Acoustic signal stop and quick
freeze switch
E) Alarm indicator

Operation and use

Installation

Insert the plug into the socket. In order to
switch on the product, turn the
thermostat (B) to a temperature lower
than << -16°C >>. The green, yellow and
red indicators will light up. The lighting up
of the on/off indicator (A) means that the
product is switched on. The yellow
indicator lights continuously indicating an
uninterrupted refrigeration for 5 hours (it
can be switched off manually after 2
hours).
The
continuously indicating an improper
temperature
compartment. As well as an intermittent
sound can be heard, which can be
stopped by pressing button (D) once.
yellow
red
indicator
in
the
freezing
You can switch off the freezer by turning
the thermostat (B) in position <<
freeze
automatically and will stop only 5
hours later. You can manually switch
off this function any time by pressing
the quick freeze (D) switch.

Adjusting the temperature

The internal temperature of the freezer
green
is regulated electronically through five
temperature positions and a switch-off
<<
>> setting.
Position << -16°C >> indicates the
highest (least cold) temperature, while
position << -24°C >> is for the lowest
red
(coldest) temperature. Rotate the
thermostat in the desired position.
In general, it is best to set the
thermostat to << -18°C >> but, for the
purpose of temperature setting, you
should also consider
the temperature of the room where
the product is installed,
the frequency of door openings,
the volume of food to be stored in the
product,
the location of the product.
Therefore, you should consider all
these factors and you may have to do
some testing for finding the best
temperature. If you want a lower
temperature, turn the thermostat into a
position of higher number or, vice versa,
if you need a higher temperature, you
lights
should set a position of lower number.
Please allow 24 hours for the freezer
temperature to stabilize between two
adjustments.
Alarm (red) indicator
The temperature alarm indicator (E) will
light up when the internal temperature
GB
When the product is switched
on for the first time, the quick
function
electrolux 27
>>.
will
start

Advertisement

Table of Contents
loading

Table of Contents