Switching Off; Functions Menu; Select / Switch Off / Switch On Each Compartement; Temperature Selection - Electrolux SB 318 N User Manual

38 electrolux
For a correct storage of the food select
the Eco mode function that guarantee the
following temperatures are set:
+5°C in the fridge
-18°C in the freezer
Wait until the inside compartment
temperature reach -18°C, before
introducing the goods in the freezer
compartment.
To select a different temperature see
"Temperature regulation".
Important
If the door remains ajar for some minutes,
the internal lighting will turn off
electronically; after this, the lighting
function will be reset by closing and
opening the door itself.

Switching off

The appliance is shut off by pressing key
(A) for more than 1 second. After this, a
countdown of the temperature from -3 -2
-1 will be shown.
When the appliance is shut off, the
ambient temperature is shown and the
corresponding icon is lighted.

Functions Menu

By activating the key D the functions
menu is operating. Each function could
be confirmed by pressing button E. If
there is no confirmation after some
seconds the display will go out from the
menu and return in normal condition.
The following functions are indicated:
Select/Switch off/Switch on fridge
compartment
Select/Switch off/Switch on freezer
compartment
Ambient Temperature
GB
Child lock function
Shopping function
Eco mode function
Fast freeze function
Chill mode function (or timer function)
Select /Switch off /Switch on
each compartment

Temperature selection

The temperature may be regulated by
pressing the key (D) to select the
compartment and than the key (B) to set
the desired temperature.
By pressing the key (B) the current
temperature setting flashes on the
indicator. To confirm the choice of the
temperature press the key (E).
You will hear the buzzer for few seconds
and the indicator displays the newly
selected temperature for a few seconds,
then shows
compartment temperature.
The newly selected-temperature must be
reached after 24 hours.
After a long period out of use it is not
necessary to set again the temperature
because it remains stored.
Attention!
During the stability period by the first
starting the temperature displayed can
not correspond
temperature. During this time it is
possible that the temperature displayed
is different than the setting temperature.
again the inside
to the setting