Controls And Functions - Eizo COLOREDGE CG245W User Manual

Calibration color lcd monitor
Hide thumbs Also See for COLOREDGE CG245W:
Table of Contents

Advertisement

NOTE
• This monitor supports the Portrait/Landscape display. This function allows you to change the orientation of the
Adjustment menu when using the monitor screen in vertical display position. (Refer to
[Orientation]" (page
• For using the monitor with "Portrait" position, the graphics board supporting portrait display is required. When
using the monitor with "Portrait" position, the setting needs to be changed depending on the graphics board used
in your PC. Refer to the manual of the graphics board for details.

1-2. Controls and Functions

Adjustment menu
1
2
3
1
Ambient Light Sensor
2
button
3
button
4
button
5
button
6
buttons
7
button
8
button
9
Main Power switch
10
Power connector
11
Input signal connectors Display Port Connector x 1
12
Input signal connectors DVI-I Connector x 2
13
USB port (Up)
14
USB port (Down)
15
Stand
16
Security lock slot
17
Cable holder
8
Chapter 1 Introduction
28).)
4
5
6
7
8
Measures ambient light.
Switches input signals for display images.
Allows you to switch the Color Mode.
Displays the SelfCalibration menu.
Cancels the adjustment/setting or exit the adjustment menu.
Chooses an adjustment item or increases/decreases adjusted values for
advanced adjustments using the Adjustment menu.
Displays the Adjustment menu, determines an item on the menu screen,
and saves values adjusted.
Turns the power on or off.
Indicates monitor's operation status.
Blue
Flashing blue
(2 times for each)
Orange
Off
Turns the main power on or off.
Connects the power cord.
Connects the USB cable to use the software that needs USB
connection, or to use USB Hub function.
Connects a peripheral USB dirive.
Used to adjust the height and angle of the monitor screen.
Complies with Kensington's MicroSaver security system.
Covers the monitor cables.
9 10
: Operating
: In the following cases, this notifies that recalibration
is required.
• When the timer is set in ColorNavigator (CAL mode)
• When the SelfCalibration schedule is set
: Power saving
: Power off
"3-4. Setting Orientation
14
16
17
15
11
12
13

Advertisement

Table of Contents
loading

Table of Contents