Table of Contents
Advertisement
4
Perform advanced adjustments for the following using the <Screen> menu of
the <Analog Adjustment>.
Adjust the clock, phase and position, in this order.
●
To eliminate vertical bars [Clock]
Procedure
1. Choose <Clock> from the <Analog Adjustment> menu, and press
2. Adjust the clock with
Press
3. Press
When blurring, flickering or bars appear on the screen after adjustment, proceed to [Phase] to remove flickering
or blurring.
●
Remove flickering or blurring [Phase]
Procedure
1. Choose <Phase> from the <Analog Adjustment> menu, and press
2. Adjust the phase with
3. Press
Attention
• Flickering or blurring may not be eliminated depending on your PC or graphics board.
●
To correct screen position [Hor.Position] [Ver.Position]
NOTE
• Since the number of pixels and the pixel positions are fixed on the LCD monitor, only one position is provided to
display images correctly. The position adjustment is made to shift an image to the correct position.
Procedure
1. Choose <Hor.Position> or <Ver.Position> from the <Analog Adjustment> menu, and press
2. Adjust the position with
3. Press
18
Chapter 2 Adjusting Screen
or
.
slowly so as not to miss the adjustment point.
to exit the adjustment.
or
.
to exit the adjustment.
or
.
to exit the adjustment.
.
.
.
Advertisement
Table of Contents
