Setting Language [Language]; Setting Range Of Frequency [Signal Bandwidth] - Eizo COLOREDGE CG245W User Manual

3-5. Setting Language [Language]

This function allows you to select a language for the adjustment menu or displaying message.
Selectable languages
English/German/French/Spanish/Italian/Swedish/Japanese /Simplified Chinese/Traditional Chinese
Procedure
1. Choose <Menu Settings> menu from the Adjustment menu, and press
2. Choose <Language> from the <Menu Settings> menu, and press
3. Choose a language with
4. Press

3-6. Setting Range of Frequency [Signal Bandwidth]

Depending upon your operating environment, it may be necessary to set the frequency that corresponds
to your graphics board. If you install it for the first time or change environment, set the monitor.
NOTE
• Refer to the manual of the graphics board.
• These environment described below can be set regardless of whether or not the computer is running.
• Only digital input signals can be set up.
Procedure
1. Press
2. Press
The Optional Settings menu appears.
3. Choose <Signal Baldwidth> from the <Optional Settings> menu, and press
4. Select "Normal" or "Wide" with
Use or
Wide -2/-3 *
*1: Wide-2/3 cannot be selected when using DisplayPort.
5. Press
6. Select "Finish" with
7. Press
The Optional Settings menu is closed.
or .
to exit the adjustment.
to turn off the monitor.
holding down at least 2 seconds to turn on the monitor.
to select (or just confirm) the frequency that corresponds to your graphics board.
Setting Horizontal scanning frequency
Normal
Wide -1
1
or .
.
or , and press .
(kHz)
26~78
26~78
Used when inputting a special signal.
.
.
.
Vertical scanning frequency
(Hz)
59~61
23.75~63
Chapter 3 Setting Monitor
29