To Set Input Signal Selection [Input Selection] - Eizo COLOREDGE CG245W User Manual

●

To set input signal selection [Input Selection]

Setting
Auto
Manual
Procedure
1. Choose <Tools> from the Adjustment menu, and press
2. Choose <
The <Input Selection> menu appears.
3. Select "Auto" or "Manual" with
4. Press
Attention
• When "Auto" is selected for <Input Selection>, the monitor's power-saving function works only when the all PCs
are in the power-saving mode.
42
Chapter 7 Reference
The monitor recognizes the connector through which PC signals are input. When
a PC is turned off or enters the powersaving mode, the monitor automatically
displays another signal.
The monitor detects only the PC's signals currently displaying automatically. Select
an active input signal with
> from the <Tools> menu, and press
Input Selection
to exit the adjustment.
Function
.
.
or .
.