Service Mode; Removing A Favorite Cycle; Sensor Dry - Maytag Dryer Service Manual

MDE/MDG7500, MDE/MDG9800

Service Mode

This mode provides Service Personnel the ability to
verify the operation of the dryer.
The Service Mode can be implemented in the middle of
any dry cycle. While in the Service Mode, the
Technician can start special diagnostic tests such as a
System Check Mode, Membrane Pad Check, Display
Software version number and display diagnostic/help
code listings.

Removing A Favorite Cycle

If the consumer wants a favorite cycle removed, see
below:
time dry
more cycles
create a
favorite
16023110
16023110

sensor dry

Air fluf
(no heat)
favorites
edit a delete a
favorite favorite
© 2000 Maytag Appliances Sales Company
blue jeans
bl
Yes
Enter Service Mode:
Press Help and Back Keys for 3 seconds or until a
beep is heard.
Exit Service Mode
Press the OFF key or Exit Service Mode on the display
exit Service Mode. After 5 minutes of inactivity in
Service Mode, the machine will exit Service Mode and
return to the state just prior to where the user first
entered Service Mode.
Section 9. Dryer Controls Overview
towels
return without
making changes
No
Making changes
9-15