ILVE built-in cooktop Operating And Installation Manual page 15

Cooking Table
CARING AND CLEANING FOR YOUR LAVA STONE BBQ
Before cleaning, disconnect the appliance from the mains. Cleaning must be carried out when the
appliance is cold. Remove all the removable parts. Remove the grid, lift the heating element and take
away the hob bed with lava stones. Stainless steel parts must be cleaned with water and detergent, then
dry with a soft cloth carefully. Under no circumstances use corrosive or abrasive detergent, this could
damage the appliance. Stainless steel, brass or copper parts must be treated by using the proper
products, thus keeping the brightness for a long time.
Control Panel and aluminum parts must be cleaned by means of degreasing detergent.
To clean the Lava Stones, you can wash them gently in hot soapy water and then allow them to dry well
before re-use. Alternatively, you can put them into a stocking, place them on the top basket of your
dishwasher and use a hot wash cycle with NO powder.
ILVE Built-in Cooktop Operating & Installation Manual 15