Table of Contents
Advertisement
Carbon filter
The activated carbon filter should only be used if you
want to use the hood in its filtering function.
To do this you will need an original AEG activated carbon
filter (see special accessories).
This filter cannot be cleaned or reused.
As a general rule, the activated carbon filter should
be changed once every four months.
Mounting — Fig. 5
Fit one carbon filter on the left and one on the right so to
cover the plastic grids that protect the fan wheel, then
turn clockwise the central handle of the carbon filter.
Fig. 5
To dismount proceed in reverse order.
Always specify the hood model code number and serial
number when ordering replacement filters. This
information is shown on the registration plate located on
the inside of the unit.
The activated carbon filter can be ordered from the AEG
technical assistance service.
31
Advertisement
Table of Contents
