Carbon Filter - AEG 222 D Installation And Operating Instructions Manual

Removing the filter
Open the grid and remove the stops M to take out the filter. See
Fig. 7.
Carbon filter
• The activated carbon filter should only be used if you want to use
the hood in its filtering function.
• To do this you will need an original AEG activated carbon filter
(see special accessories).
• This filter cannot be cleaned or reused.
• As a general rule, the activated carbon filter should be
changed once every four months.
• Mounting - Fig 8
a. Fit first rearwards on the proper seats.
b. Then fix frontwards the carbon filter using hooks C.
• Dismounting :
Unhook the carbon filter from its housing pushing hooks C.
□
• Always specify the hood model code number and serial number
when ordering replacement filters. This information is shown on
the registration plate located on the inside of the unit.
• The activated carbon filter can be ordered from the AEG Service
Force.
15