Displaying Time Permanently With Device Switched Off And Ignition Switched On (Off Clock); Sound - Blaupunkt Seattle MP57 Operating And Installation Instructions

Clock
When you have fi nished making your
changes,
u press the OK button B repeatedly un-
til you reach the desired menu level for
additional settings or completely exit
the menu.
Displaying time permanently
with device switched off and
ignition switched on (Off Clock)
u Press the MENU button A.
The menu is displayed.
u Press the softkey "Clock Settings" ;.
The "Clock" menu is displayed.
To display the time when the device is off
and the vehicle ignition is on,
u press the softkey "Off Clock" ::
• : The time is displayed.
• : The time is not displayed.
When you have fi nished making your
changes,
u press the OK button B repeatedly un-
til you reach the desired menu level for
additional settings or completely exit
the menu.
Note:
You can replace the factory-selected
wallpaper of the time display with your
own. For further details, please read
the section "Changing wallpapers of
the display" in the chapter "Adjusting
the display".

Sound

You can adjust the sound settings (bass,
middle and treble) separately for each
source (radio, CD, CD changer, USB, AUX,
and telephone/navigation). The volume
distribution settings (balance and fader)
and X-BASS apply to all the audio sources
except for telephone/navigation. You can
adjust the volume distribution settings sep-
arately for telephone/navigation.
Note:
The settings of the sound for telephone/
navigation can only be made during a
telephone call/voice output.
This device features a digital 3-band equal-
izer. This equalizer allows for selecting one
frequency each for bass, treble and middle
and to adjust the level for the selected fre-
quency between -7 and +7. In addition, you
can adjust the quality factor for bass and
middle.
The quality factor Q determines the fi lter
quality of the equalizer, i.e. the edge steep-
ness and fi lter bandwidth, dependent upon
the characteristic frequency. A low quality
factor means a low edge steepness and a
high fi lter bandwidth; a high quality factor
means a high edge steepness and a low fi l-
ter bandwidth.
Sound
31