Blaupunkt KOPENHAGEN RCR 45 Operating Instructions Manual page 17

TIME The current time will be
displayed, or it has to be
adjusted.
For more information, see
chapter "Traffic Memo
(TIM), Setting the time in
the DSC menu").
TIM TIME To adjust the TIM time.
To activate/deactivate TIM.
For more information, see
chapter "Traffic Memo
(TIM), Adjusting the TIM
standby mode).
TA VOL To adjust the traffic an-
nouncement volume from
between 1 to 9. The mes-
sage will then come
through at this volume.
(1 = low)
BEEP Confirmation tone for all
functions which require a
button to be pressed for
more than 2 seconds.
The volume can be adju-
sted from between 0 to 9.
(0 = off)
34
Each alteration of this va-
lue is confirmed by a beep
tone of the corresponding
volume.
You can adjust the LED B
LED (code)
to flash for extra anti-theft
protection.
LED 1 - LED always flash-
es when the unit
has been swit-
ched off via the
ignition.
LED 0 - No flashing.
LOUD Loudness - When listening
at a low level, the Loud-
ness function creates a
more natural sound by
boosting the low frequency
range.
LOUD 1 - Low boost
LOUD 6 - Max. boost
RM (Radio Monitor)
With RM-ON, the unit will
automatically switch to the
tuner whenever the casset-
te is fast winding.
RM-OFF - The function is
switched off.
LOCAL (lo)
To adjust the seek tuning
sensitivity for local recepti-
on.
LOCAL 1 - high sensitivity
LOCAL 3 - low sensitivity
DIS (dx)
To adjust the seek tuning
sensitivity for distant recep-
tion.
DIS. 1- high sensitivity
DIS. 3- low sensitivity
LEARN KC To "define" a second Key-
Card for use with the set.
Please read the information
under "KeyCard theft-pro-
tection system".
To quit the DSC programming mode and
store the adjustment:
• Press DSC.
If the setting remains unchanged within 8
seconds, the system will automatically store
the last adjustment. The display will switch
back to the previous condition.