Electrolux 1000FA User Manual page 13

13
Oven door
Removing oven door from its hinges
To make it easier to clean the oven, the oven door can
be removed.
Open the oven door into the horizontal position. Then
lift up the clips on the two door hinges as far as they
will go (a).
Slowly close the door again as far as the stop and lift
the door until the hinges come out (b).
Replacing the oven door on its hinges
When putting the door back on its hinges, reverse the procedure for removing the door
from its hinges.
Re-insert the door's hinges into the slots (c). When you
do this, make sure the hinges engage properly and
evenly.
Then slowly lower the door downwards. When you do
this, make sure the corners of the door do not touch the
bottom of the frame (if this happens, lift the door up
again and realign the hinges).
Finally fold the clips back down towards the oven (d).
So that the door closes properly, press down on the
clips with something (e.g. a screwdriver) (e).
Slowly check the correct operation of the door.
Important: Never leave the door hinge levers standing
up. Otherwise the spring action can lead to injury.