Manual Time Adjustment (To Set Only The Time) - Seiko ASTRON User Manual

4
BASIC OPERATION (HOW TO SET THE TIME/HOW TO RECEIVE GPS SIGNALS, ETC.)
To set only the time (manual time adjustment)
Manual time adjustment
The watch can be set to the precise current time of the currently set time zone.
(The time zone is not changed.)
 How to manually adjust the time
 Check the time zone setting
 In the manual time adjustment, the precise time of the currently set time zone is displayed.
When the region or time zone where the watch is used is changed, adjust the time zone.  How to adjust the time zone
(If the time zone is adjusted, the time zone setting, time and date will be adjusted, so it is not necessary to manually adjust the
time immediately thereafter.)
 Daylight Saving Time (DST) is not automatically set. Carry out the setting manually.  Set Daylight Saving Time (DST)
 Failure or success of reception depends on the reception environment.  Place where GPS signals can be easily received/Place
where GPS signals cannot be received P . 13
 At the time when the reception was successful by manually adjusting the time, automatic time adjustment may be performed. For
details, refer to "Automatic time adjustment
 GPS signal reception consumes a lot of energy.
Keep in mind to charge the watch regularly by expose to light so that the indicator hand points to the "level position (middle)" or
"F (full). "  How to charge the watch P . 11
(When the charging status becomes "E (low), " the reception will not start even with operation of GPS signal reception.)
 Check the charging status. P . 10
P. 22
P. 16
P . 23 <When it is difficult to exposure to light>. "
21
ASTRON 7X52 GPS SOLAR
P . 14 ~ 16
P . 17 ~ 18
Continued on the
following page