Time Zone Adjustment; Watch Is Used Is Changed ) - Seiko ASTRON User Manual

4
BASIC OPERATION (HOW TO SET THE TIME/HOW TO RECEIVE GPS SIGNALS, ETC.)
When the region or time zone where the watch is used is changed (Time Zone Adjustment)

Time zone adjustment

The time zone where you are is localized to adjust the watch to
the precise current time by receiving GPS signals.
The watch can be arbitrarily set to the local time by just one
button operation at any time.
 How to adjust the time zone
 Failure or success of reception depends on the reception environment.
 Place where GPS signals can be easily received/Place where GPS signals
cannot be received P. 13
 Even when the reception is successful, Daylight Saving Time (DST) cannot be
automatically set. Set DST manually.
 Set Daylight Saving Time (DST)
 GPS signal reception consumes a lot of energy.
Keep in mind to regularly charge the watch by expose to light so that the
indicator hand points to the "level position (middle)" or "F (full). "
 How to charge the watch
If the charging status is displayed as "E (low), " the reception will not start
even with operation of GPS signal reception.
 Check the charging status.
P. 15
P. 17 ~ 18
P . 11
P . 10
ASTRON 7X52 GPS SOLAR
Precautions on time zone adjustment
If the time zone is adjusted near a time zone boundary, the time
of the adjacent time zone may be displayed.
In some areas the boundaries observed by the watch may not
exactly correlate to the actual time zone markers on the land.
This does not indicate a malfunction.
In this case, set the time zone in the manual time zone setting
mode.
 How to manually set the time zone
When the time zone is adjusted while traveling on land, avoid
time zone boundaries to carry out time zone adjustment in the
representative cities in the time zone whenever possible.
In addition, when the watch is used near time zone boundaries,
make sure to check the time zone setting, and manually set the
time zone as necessary.
14
P . 20
Continued on the
following page