Seiko ASTRON User Manual page 56

8
TROUBLESHOOTING
At trouble
The position of the hand
showing the reception
Indicator hand
type, charging status, in-
misalignment
flight mode ( ), and DST
is misaligned
The crown or buttons
cannot be operated.
Operation
You get lost in the middle
of the operation.
Other
Blur on the dial glass
trouble
persists.
Possible causes
The automatic leap second reception
function has been activated.
(The second hand is stopped between
the 0-second to 18-second positions.)
The preliminary position of the indicator hand is misaligned.
This occurs when the preliminary position of the indicator hand
is misaligned due to external factors or system reset.
The stored electric power is running short
Date is moving right after a setting is carried out by the crown or
button operation.
— — —
Small amount of water has got inside the watch due to
deterioration of the gasket, etc.
ASTRON 7X52 GPS SOLAR
Solutions
It takes up to 18 minutes to complete the leap second reception.
Use the watch with reference to the "Place where GPS signals can be easily received P . 13. "
Adjust the preliminary position of the indicator hand to the correct position.
Sufficiently charge the watch until it starts moving at 1-second intervals.
Wait without doing anything.
After the date stops, the crown and buttons can be operated.
When the crown is pulled out
1 Push the crown back in.
2 The second hand will start to move within 9 minutes.
3 After that, restart operation.
When the crown is not pulled out
1 Press Button A.
2 The second hand will start to move within 2 minutes.
3 After that, restart operation.
Contact the retailer from whom the watch was purchased.
55
Reference
pages
P . 30
P . 46 ~ 47
P . 11
—
—
—
—