Seiko ASTRON User Manual page 50

8
TROUBLESHOOTING
Set the date to "1" (1st) (5, 6)
 If the date is stopped continuously for 1 minute or longer, the
watch automatically returns to the time display mode. When the
watch has returned to the time display mode, restart operation.
Continue to press Button B and C simultaneously
5
(3 seconds) and release them when the second
hand moves to the 13-second position
The watch enters the mode to adjust the
preliminary position of the date.
Press for
3 seconds
simultaneously
 During movement of the date, the buttons cannot
be operated.
6
Adjust the date so that the position
of "1" will locate at the center of the
window.
 If "1" is displayed, go to operation of 7.
 Never pull the
Button B
crown out.
Button C
 If no operation is performed for more than 1 minute or when Button A is
pressed once, the watch returns to the time display mode.
When the watch has returned to the time display mode, restart operation.
Press Button B or C to
set the date to "1"
Pressing
once
advances
the date
slightly
If the button is kept
pressed for 2 seconds,
the date moves
continuously. Press
the button again to
stop the date.
Pressing
once
returns
the date
slightly
49
ASTRON 7X52 GPS SOLAR
Set the indicator hand to "E" (7 ~ 9)
Continue to press Button A (2 seconds),
7
and release it when the second hand
moves to the 55-second position
The watch enters the mode to adjust
the preliminary position of the
indicator hand.
Press for
2 seconds
Continued on the
following page