Table of Contents
Advertisement
3
BASIC OPERATION
Manual time adjustment (To set only the time)
Manual time adjustment
The watch can be set to the precise current time of the currently set time zone.
(The time zone is not changed.)
→ How to manually adjust the time P.45
→
Check the time zone setting P.40
※ In the manual time adjustment, the precise time of the currently set time zone is displayed.
When the region or time zone where the watch is used is changed, adjust the time zone.
→ How to adjust the time zone P.40
(If the time zone is adjusted, the time zone setting, time and date will be adjusted, so it is not necessary to
manually adjust the time immediately thereafter.)
※ Daylight Saving Time (DST) is not automatically set. Carry out the setting manually
→ Set Daylight Saving Time (DST) P.41
※ Failure or success of reception depends on the reception environment.
→ Place where GPS signals can be easily received/Place where GPS signals cannot be received P.38
※ A t the time when the reception was successful by manually adjusting the time, automatic time adjustment may
be performed. For details, refer to
Automatic time adjustment P.46
※ GPS signal reception consumes a lot of energy.
K eep in mind to charge the watch regularly by expose to light so that the indicator hand points to the level
position (middle) or F (full).
( When the charging status becomes E (low), the reception will not start even with operation of GPS radio
signal reception.) → Check the charging status P.36
＜ When it is diffi cult to exposure to light ＞
44
3
BASIC OPERATION
How to manually adjust the time
Continue to press Button B (3 sec),
1
2
and then release it when the second
hand moves to the 0-sec position.
Move to the
When the second hand has
outdoors under
reached the 0-sec position,
an open sky with
reception is started.
good visibility
The indicator hand points to
where GPS
1.
signals can be
easily received.
※ W hile the indicator hand points
to E or
, reception is not
started even with operation for
reception.
When the hand points to E,
charge the watch by expose
to light.
When the hand points to ,
reset the in-fl ight mode （ ）
When the second hand
Direct the watch face
3
4
points to Y or N,
upward and wait
reception is completed.
The reception result is displayed
It takes up to
for 5 seconds.
1 min to complete
Then, the hour and minute hands
reception.
move, and the time and date are
※ T he reception time
adjusted.
d e p e n d s o n t h e
reception conditions.
Reception
result
<Display during reception>
Press
Successful
for
The second hand indicates
display
3 sec
ease of receiving (= number of
GPS satellites from which GPS
signals are received).
Display
※ T o acquire only time information,
the number of satellites necessary
Check that the reception is
for reception is one.
successful after the watch
returns to the time display
Number of
mode.
acquired
１
０
When the time is not correct
satellites
even if Y is displayed, the
time zone may not correspond
Display
to the region where you are.
→ Check the time zone setting.
P.40
Easy to
Cannot
State
receive
receive
※ T o cancel the reception, press
Button A.
Press
45
Y:
N:
Failed
Advertisement
Table of Contents
