Set Daylight Saving Time (Dst) - Seiko ASTRON User Manual

4
BASIC OPERATION (HOW TO SET THE TIME/HOW TO RECEIVE GPS SIGNALS, ETC.)
Turn ON Daylight Saving Time (DST)
Daylight Saving Time (DST) can be manually set.
Start operation of 2 within approximately 5 seconds after operation of 1.
 When the state of 1 continues for approximately 5 seconds or longer, the watch automatically returns to the time display mode. When the watch has returned to the time display mode, restart operation from 1.
1
Press Button A
The indicator hand moves to indicate
the current Daylight Saving Time
(DST) setting.
<
When Daylight Saving Time (DST) setting
>
is OFF
Press
Button A
Turn OFF Daylight Saving Time (DST)
Carry out operation of 1 to 3 in the state where Daylight Saving Time (DST) setting is ON.
In operation of 2, adjust the indicator hand to the "OFF" position as shown in the figure at the right.
The hour and minute hands return by one hour.

Set Daylight Saving Time (DST)

2
Continue to press Button C (3 seconds) within 5 seconds
after operation of 1
The indicator hand moves to point to "ON, " and the hour and
minute hands advance by one hour.
18
ASTRON 7X52 GPS SOLAR
 Daylight Saving Time (DST) is not automatically changed.
 ON/OFF of the DST is not automatically changed over even with operation of time
zone adjustment/manual time zone setting.
When traveling to a region where Daylight Saving Time (DST) is not adopted from
a region where it is adopted, turn off the DST setting.
When the hour and minute hands stop
3
moving, the DST setting mode is automatically
completed after approximately 5 seconds.
The watch returns to the time display mode.
The indicator hand returns to display the charging
status.
 The time at which the
watch returns to the time
display mode varies
depending on the position
of the indicator hand.
 The watch returns to
the time display mode
Press for
even by pressing button
3 seconds
A within five seconds
after the hour and minute
hands stop moving.
Press
Button A.