Operating Mode - GE ProBridge User Manual

ProBridge Gateway
3 O
PERATING
Setting the ProBridge Gateway in Operating mode:
•
Set the device to operating mode by setting the dipswitch at SW4.
(SW4-7 RS232 SEL off, SW4-8 RS485 SEL on)
•
Connect the devices and cables as shown below.
•
Cycle power on the ProBridge Gateway box and the other devices.
Connection Diagram for Operating mode is shown below.
KB3 Protocol menu item must be set to YES.
0150-0265C / April 2006
M
ODE
GE Security
9