Honda CH250 ELITE250 Owner's Manual page 63

IDLE SPEED
The engine must be warm for accurate
idle adjustment. Ten minutes of stop-and-
go riding is sufficient.
NOTE:
Do not attempt to compensate for
*
faults in other systems by adjusting
idle speed. See your authorized Honda
scooter dealer for regularly scheduled
carburetor adjustments.
1. Remove the rubber cap (1).
(1) Rubber cap
Warm up the engine and place the
2.
scooter on its center stand.
The rear wheel will spin if not restrain-
ed by the brake. Accidental contact
with the spinning rear wheel could
cause personal injury.
Adjust idle speed with the throttle
stop screw (2).
IDLE SPEED: 1,500 + 100 rpm.
(2)
Throttle stop screw