BELT CASE AIR CLEANER
1. Remove the left side rear
the frame.
I
2. Loosen the air cleaner
screw, and remove the cover (1).
3. Remove element (2).
or high flash point solvent and allow
to dry.
* Never use gasoline
U
solvents for cleaning the belt case air
cleaner element. A fire or explosion
could result.
A
T
52
cover from
duct band
flash point
or low
CAUTION:
the element to dry thoroughly
* Allow
before installation.
* Do not apply oil to the element, dam-
age to the drive belt will occur.
5.
Install the filter element and element
holder.
6. Install the cover and tighten the screw.
7. Install the left side cover.
(2)
element