Installation - Electrolux EWC 10550 W User Manual

Installation

Unpacking
All transit bolts and packing must be
removed before using the appliance.
You are advised to keep all transit
devices so that they can be refitted if the
machine ever has to be transported
again.
1.Using a spanner, unscrew and
remove the two rear bottom screws.
Slide out the two plastic pins.
2.Lay the machine on its back, taking
care not to squash the hoses. This
can be avoided by placing one of the
corner packing pieces between the
machine and the floor.
3.Remove the polystyrene block from
the bottom of the machine. Unscrew
and remove the four feet.
Release the two plastic bags.
4.Very carefully slide out the left
polythene bag, removing it towards
the right and then downwards.
5.Very carefully slide out the right
polythene bag, removing it towards
the left and then upwards.
6.Carry out the bottom cover placed
on the top of your appliance, lay its
hook as the arrow «A» indicates and
push the top of the cover to seal it
closed.
installation electrolux 31