Electrolux EWC 10550 W User Manual page 13

Rinse Hold: by selecting this option
the water of the last rinse is not
emptied out to prevent the fabrics from
creasing. When the programme has
finished the display shows
flashing, the pilot light
of button 8 is off and the door is
locked to indicate that the water must
be emptied out.
To empty the water out please read
chapter «At the end of the
programme».
Select the Prewash option by
pressing button
Select this option if you wish your
laundry to be prewashed at 30°C
before the main wash.
The Prewash ends with a short spin in
programmes for cotton and synthetic
fabrics, whereas in the programmes for
delicate fabrics the water is only
drained.
Select the Extra Rinse option by
pressing button
The machine performs some additional
rinses. This option is recommended for
people who are allergic to detergents,
and in areas where the water is very
soft.
Select the Delay Start by pressing
6
button
Before you start the programme, if you
wish to delay the start, press button
repeatedly, to select the desired delay.
The relevant light will illuminate.
0.00
9
is on, the light
4
5
The selected delay time value (up to 20
hours) will appear on the display for a
few seconds, then the duration of the
programme will appear again.
You must select this option after you
have set the programme and before you
press button
If you wish to add laundry in the
machine during the delay time you will
press button
pause. Add the laundry, close the door
and press button
You can cancel or modify the delay time
at any moment, before you press
8
button .
The wash programme can be delayed
from 30 min - 60 min - 90 min, 2 hours
and then by 1 hour up to a maximum of
20 hours by means of this button.
Selecting the delayed start
• Select the programme and the
required options.
• Select the delay start.
• Press button
hourly countdown.
The programme will start after the
selected delay has expired.
Cancelling the delayed start
• Press button
• Press button
0'
symbol
• Press button
The Delay Start can not be selected
with Drain programme.
6
Select the Start/Pause by pressing
8
button
To start the selected programme, press
8
button ; the green pilot light stops
flashing.
To interrupt a programme which is
use electrolux 13
8
.
8
to put the machine in
8
again.
8
: the machine starts its
8
.
6
button once until the
is displayed.
8
again.