Related Manuals for Biamp 801I
Summary of Contents for Biamp 801I
- Page 1 801i Mic/Line Mixer Operation Manual Biamp Systems | 9300 S.W. Gemini Drive | Beaverton, OR | 97008 | USA | +1.503.641.7287 | www.biamp.com...
-
Page 2: Table Of Contents
TABLE OF CONTENTS Introduction pg. 1 Front Panel pg. 2 Rear Panel pg. 3 Remote Control pg. 4 Specifications & Block Diagram pg. 5 Warranty pg. 6 July, 2009... -
Page 3: Introduction
INTRODUCTION The 801i is a single rack-space mixer, with eight mic/line inputs and one auxiliary line input. Each mic/line channel uses a differentially balanced, discrete transistor preamplifier for low noise and low distortion performance. Special features, including a limiter and remote level control, make the 801i extremely versatile. -
Page 4: Front Panel
Treble: This control provides high-frequency tonal adjustment (±10dB @ 10kHz) for signals at Main Patch & Main Output. On Indicator: When the power transformer is plugged in, and AC power is applied to the 801i, the red On indicator remains lit. -
Page 5: Rear Panel
Main Output of one mixer to Stack In of the next mixer, Remote allows remote control of Main Output level, by enabling and so forth. All mixers except the final 801i should be assigned the Remote terminals (see above). -
Page 6: Remote Control
(0~+10VDC). An RP-L1 remote control panel is available as an option (see diagram below). Potentiometers are wired high (V), wiper (C), and low ( ). Ramp voltage is wired positive (C) and ground( ). The Remote port of the 801i mixer must be enabled before remote control of output level is possible (see Master DIP Switches on pg. -
Page 7: Specifications & Block Diagram
SPECIFICATIONS & BLOCK DIAGRAM... -
Page 8: Warranty
WARRANTY BIAMP SYSTEMS IS PLEASED TO EXTEND THE FOLLOWING 5-YEAR LIMITED WARRANTY TO THE ORIGINAL PURCHASER OF THE PROFESSIONAL SOUND EQUIPMENT DESCRIBED IN THIS MANUAL 1. BIAMP Systems warrants to the original purchaser of new THIS WARRANTY IS IN LIEU OF ALL OTHER products that the product will be free from defects in material WARRANTIES, EXPRESS OR IMPLIED. -
Page 9: Ec Declaration Of Conformity
DIRECTIVES below except as noted herein. Any alterations to the product not agreed upon and directed by Biamp Systems Corporation will invalidate this declaration. Product Models: 301, 601, 801i...
Need help?
Do you have a question about the 801I and is the answer not in the manual?
Questions and answers