Related Manuals for Biamp 801
Summary of Contents for Biamp 801
- Page 1 Mic/Line Mixer Operation Manual Biamp Systems, 10074 S.W. Arctic Drive, Beaverton, Oregon 97005 U.S.A. (503) 641-7287 www.biamp.com an affiliate of Rauland Borg Corp.
- Page 2 blank print update June 17, 2002...
-
Page 3: Table Of Contents
TABLE OF CONTENTS INTRODUCTION Front Panel pg. 2 The 801 is a single rack-space mixer, with eight mic/line inputs and one auxiliary line input. Each mic/line channel uses a differentially balanced, Rear Panel pg. 3 discrete transistor preamplifier for low noise and low distortion performance. -
Page 4: Front Panel
Treble: This control provides high-frequency tonal adjustment (±10dB @ 10kHz) for signals at Main Patch & Main Output. On Indicator: When the power transformer is plugged in, and AC power is applied to the 801, the red On indicator remains lit. -
Page 5: Rear Panel
Main Output of one mixer to Stack In of the next mixer, and so forth. All mixers except the final 801 should be assigned as Master DIP Switches: These switches assign functions to the ‘slaves’... -
Page 6: Options
(0~+10VDC). An RP-L1 remote control panel is available as an option (see diagram on next page). Potentiometers are wired high (V), wiper (C), and low ( ). Ramp voltage is wired positive (C) and ground( ). The Remote port of the 801 mixer must be enabled before remote control of output level is possible (see Master DIP Switches on pg. - Page 7 OPTIONS OVERRIDE DC out to ’slave’ external DC Out switch pins 3 & 6 REMOTE high (cw) white (to ’V’) wiper 25k ohm red (to ’C’) linear low (ccw) green (to ’ ’) INPUT TRANSFORMERS OUTPUT TRANSFORMER channels 1~8 input main out stack in switches...
-
Page 8: Applications
MADE IN U.S.A. This application shows two 801 mixers being used together to create an eighteen input mixing system. Main Output of the bottom unit is connected to Stack In on the top unit, which then provides all channel signals at its Main Output. All mic inputs have phantom power (for condenser mics) and high-pass filter (for speech signals) assigned. - Page 9 (use HPF) This application shows an 801 mixer connected with other BIAMP products to provide a 4-zone paging & background music system with page routing, music source selection, override, and amplification. The 801 mic inputs have phantom power (for condenser mics) and high-pass filter (for speech signals) assigned.
-
Page 10: Specifications & Block Diagram
1~2 mS (program dependent) width 19 inches (483mm) release time 100~500 mS (program dependent) depth 7 inches (178mm) threshold range -4dBu ~ +24dBu Weight: 6 lbs. (2.72kg) 801 Block Diagram channel 1 only +24V signal +10dB channel (+48V option) override detect patch... -
Page 11: Warranty
WARRANTY BIAMP SYSTEMS IS PLEASED TO EXTEND THE FOLLOWING 5-YEAR LIMITED WARRANTY TO THE ORIGINAL PURCHASER OF THE PROFESSIONAL SOUND EQUIPMENT DESCRIBED IN THIS MANUAL. BIAMP Systems expressly warrants this product to be 4. BIAMP SYSTEMS SHALL NOT IN ANY EVENT BE...