Power Function; Minute Minder; Power Management; Using The Timer - AEG HD634170NB User Manual

10 www.aeg.com
11
10
9
8
7
6
5
4
3
2
1
0
4.7 Switching on and off the

power function

The power function gives more power to
an induction cooking zone for no longer
than 10 minutes. After that time, the in-
duction cooking zone automatically sets
back to
comes on. To stop it, set a heat setting
between

Power management

The power management divides the
power between two cooking zones. The
power function increases the power to
the maximum level for one cooking zone
in the pair and automatically decreases
in the second cooking zone to a lower
power level. The display for the reduced
zone alternates. The priority is given to
the last set zone.

4.8 Using the Timer

Count Down Timer

Use the Count Down Timer to set how
long the cooking zone operates for one
cooking session.
Set the Count Down Timer after the
selection of the cooking zone.
You can set the heat setting before or af-
ter you set the timer.
• Selection of the cooking zone:touch
again and again until the indicator
of a necessary cooking zone comes
on.
• Starting the Count Down Timer:
touch
1 2 3 4 5 6
. To start it , touch
and .
of the timer to set the time (
00
of the cooking zone flashes slower, the
time counts down.
• Checking the remaining time: select
the cooking zone with
tor of the cooking zone flashes faster.
The display shows the remaining time
of the zone that will stop first.
• Changing the Count Down Timer:
select the cooking zone with
• Stopping the timer: select the cook-
7 8 9
ing zone with
maining time counts backwards to
. The indicator of the cooking zone
goes out. To switch off You can also
touch
When the time elapses, the sound op-
erates and
zone switches off.
and

Minute Minder

You can use the timer as a Minute Mind-
er while cooking zones do not operate.
Touch
select the time. When the time elapses,
the sound operates and
• Stopping the sound: touch
4.9 Starting the STOP+GO
The
that operate to a keep warm setting.
• Touch
symbol
• Touch
heat setting that you set before comes
on.
does not stop the timer function.
fully locks the control panel but not
the sensor field
4.10 Locking / unlocking the

control panel

You can lock the control panel. It pre-
vents an accidental change of the heat
setting.
First set the heat settings.
To start this function touch
bol
99
- minutes). When the indicator
or .
. Touch
and at the same time.
00
flashes. The cooking
. Touch or
00
function sets all cooking zones
to start this function. The
comes on.
to stop this function. The
.
comes on for 4 seconds.
. The indica-
touch
. The re-
00
of the timer to
flashes.
. The sym-