Product Description - AEG HD634170NB User Manual

www.aeg.com
6
• Do not activate the cooking zones
with empty cookware or without cook-
ware.
• Do not put aluminium foil on the ap-
pliance.
• Cookware made of cast iron, alumini-
um or with a damaged bottom can
cause scratches on the glass ceramic.
Always lift these objects up when you
have to move them on the cooking
surface.
• Provide good ventilation in the room
where the appliance is installed.
• Make sure that the ventilation open-
ings are not blocked.
• Use only stable cookware with the cor-
rect shape and diameter larger than
the dimensions of the burners. There
is a risk of overheating and rupture of
the glass plate (if applicable).
• Make sure the flame does not go out
when you quickly turn the knob from
the maximum to the minimum posi-
tion.
• Make sure pots are centrally posi-
tioned on the rings and do not stick
out over edges of the cooking surface.
• Use only the accessories supplied with
the appliance.
• Do not install a flame diffuser on the
burner.

3. PRODUCT DESCRIPTION

3.1 Cooking surface layout
6
1 2
140
mm
210
mm
5 4
2.3 Care and Cleaning
WARNING!
Risk of damage to the appliance.
• Clean regularly the appliance to pre-
vent the deterioration of the surface
material.
• Do not use water spray and steam to
clean the appliance.
• Do not clean the burners in the dish-
washer.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
cleaning pads, solvents or metal ob-
jects.
2.4 Disposal
WARNING!
Risk of injury or suffocation.
• Contact your municipal authority for
information on how to discard the ap-
pliance correctly.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
• Flat the external gas pipes.
Induction cooking zone 1400 W with
1
the power function 2500 W
Rapid burner
2
Semi-rapid burner
3
Control knobs
4
3
Touch control panel
5
Induction cooking zone 2300 W with
6
the power function 3300 W