Quick start guide to your SPA 500S SPA 500S 32-Button Attendant Console for Cisco Small Business SPA 500 Series IP Phones working with daisy 0800 040 8888 www.daisygroupplc.com v1 - 06/13...
Connecting the equipment The following procedure describes how to attach the Cisco SPA 500S to a Cisco SPA 500 Series IP Phone. Step 1 Step 4 Turn both the Cisco SPA 500 Series IP Using an attachment arm screw, secure Phone and the Cisco SPA 500S face down.
Step 7 Using an attachment arm screw, secure the attachment arm to the Cisco SPA 500S. CAUTION Do not plug a telephone line cord into the ‘AUX’ port. Use only the auxiliary cable provided with the Cisco SPA 500S. Step 8 Step 9 Locate the ‘AUX IN’...
Step 10 Route the auxiliary cable inside the cable slot of the Cisco SPA 500S. Step 11 Attach the appropriate desktop stand to each unit. working with daisy 0800 040 8888 www.daisygroupplc.com v1 - 06/13...
SPA 500S A maximum of two Cisco SPA 500S attendant consoles can be connected to a Cisco SPA 500 Series IP Phone. The instructions in this section are for connecting a second SPA 500S. If you are not attaching a second Cisco SPA 500S, skip to the ‘Confi guring the Cisco SPA 500S’...
Step 8 Locate the ‘AUX OUT’ port on the back of the fi rst Cisco SPA 500S. Connect one end of the auxiliary cable to this port. Step 9 Locate the ‘AUX IN’ port on the back of the second Cisco SPA 500S.
To configure the Cisco SPA 500S: • If the Cisco SPA 500S and attached Cisco SPA 500 Series IP Phone are part of a Cisco SPA 9000 Voice System, we recommend that you use the Cisco SPA 9000 Set-up Wizard. See the System Configuration using the SPA 9000 Set-up Wizard Installation and Configuration Guide on www.cisco.com.
Using the Cisco SPA 500S You can press a button on the Cisco SPA 500S to dial an associated line, pick up a call ringing on a line, or transfer a call to the line. The options available on the Cisco SPA 500S depend on the phone system configuration. Your phone system might not provide all of the features mentioned in this document.