Table of Contents
Advertisement
GENERAL FEATURES
Function (FCN) Switch
If an option switch is programmed for FCN (function), it performs
the following functions. If this switch is not programmed, these functions
are not available. When the function select mode is active, "FCN" is
displayed on the lower line of the display. The function mode is automati-
cally exited after 8 seconds of no activity.
Menu Mode Select - Pressing FCN twice selects the menu mode as
described on page 33.
Home System/Group Select - Pressing FCN and then the Select switch
selects the home system/group as described in the next section.
Squelch Adjust - Pressing FCN and then rotating the Select switch with a
conventional system selected sets the squelch level as described on
page 18.
Home System/Group Select
To select the preprogrammed Home system/group, simply press the
FCN switch and then the Select switch. The Home system/group is then
displayed and it becomes the selected system/group. If no home group
has been programmed, the last selected group of the home system is
selected. If you do not have a FCN switch, or no Home system is
programmed, this feature is not available.
Horn Alert
If this feature has been installed by your system operator, it activates
an external alert such as the vehicle horn or lights when a call is received
on a group programmed for horn alert. When the horn alert is enabled,
is displayed as shown in the following illustration.
28
Horn Alert
Enabled
Advertisement
Table of Contents
