Alpha Tag Display Mode; Selecting The System And Group - E.F. Johnson Company MULTI-NET 98xx SERIES Operating Manual

bottom line. For example, a "SECURITY" system and "CAR 220" group
are displayed as follows. The system and group numbers are not
displayed in this mode.

Selecting the System and Group

The front panel Select switch is used to change the system and
group. Pressing this switch toggles between the system and group select
modes, and then rotating it increases or decreases the system or group.
In the Numeric display mode (see preceding description), the system
select mode is indicated when the arrow points to "Sxx", and the group
select mode is indicated when it points to "Gxx" (see following diagram).
System Select
Select Mode Indication With Numeric Display
In the Alpha Tag display mode, the system select mode is indicated
by an underline in the left-most character position of the system alpha
tag. Likewise, the group select mode is indicated by an underline in the
left-most position of the group alpha tag (see following diagram).

Alpha Tag Display Mode

Mode
GENERAL OPERATION
System Alpha Tag
Group Alpha Tag
Group Select
Mode
17