Setting The White Balance; Setting The Iso; Setting The Exposure; Setting The Aeb - BenQ DC C1050 User Manual

3.7.3 Setting the white balance

Adjust the white balance to match different light sources such as sunlight, incandescent
(tungsten) lighting or, fluorescent lighting.
Icon Mode
Auto
Daylight
Cloudy
Tungsten
Fluor_H
Fluor_L
SH1
(Custom)

3.7.4 Setting the ISO

With the initial settings, the ISO sensitivity is automatically set according to the brightness of
the subject.
• A higher ISO value increases the image noise. To take clean images, use an ISO value as
low as possible.

3.7.5 Setting the Exposure

Set the exposure value manually to compensate for unusual lighting conditions such as
indirect indoor lighting, dark backgrounds, and strong backlighting.

3.7.6 Setting the AEB

Sets the auto exposure bracketing (AEB) to shoot 3 continuous images, each with a different
exposure setting: correctly exposed, underexposed, and overexposed.

3.7.7 Setting the highlight

Description
Automatically corrects white balance. Ideal for general photography.
Adjusts for bright sun conditions, or natural light conditions.
Adjusts for cloudy days or twilight conditions.
Adjusts for normal indoor lighting conditions. Corrects the orange
hue of household light bulbs. Ideal for indoor photos under
tungsten or halogen lighting without a flash.
Adjusts for fluorescent lighting. Corrects the green hue of
fluorescent lighting. Ideal for indoor photos under fluorescent
lighting without a flash.
For more accurate adjustment or when the light source cannot be
specified. When this option is highlighted, press the shutter button
to enter the [Custom WB]
something white (for example, white paper) as the reference white
color and press the shutter button again. Next, press
the custom setting.
mode. Then, point the camera at
Using the Camera
to confirm
OK
13