Setting The White Balance; Setting The Iso; Setting The Exposure; Setting The Aeb - BenQ DC C740 User Manual

3.7.3 Setting the white balance

Adjust the white balance to match different light sources such as sunlight, incandescent
(tungsten) lighting or, fluorescent lighting.
Icon Mode Description
Auto Automatically corrects white balance. Ideal for general photography.
Daylight Adjusts for bright sun conditions, or natural light conditions.
Cloudy Adjusts for cloudy days or twilight conditions.
Tungsten Adjusts for normal indoor lighting conditions. Corrects the orange
hue of household light bulbs. Ideal for indoor photos under
tungsten or halogen lighting without a flash.
Fluor_H Adjusts for fluorescent lighting. Corrects the green hue of
Fluor_L fluorescent lighting. Ideal for indoor photos under fluorescent
lighting without a flash.
SH1 For more accurate adjustment or when the light source cannot be
(Custom) specified. When this option is highlighted, press the shutter button
to enter the
something white (for example, white paper) as the reference white
color and press the shutter button again. Next, press
the custom setting.

3.7.4 Setting the ISO

With the initial settings, the ISO sensitivity is automatically set according to the brightness of
the subject.
• A higher ISO value increases the image noise. To take clean images, use an ISO value as
low as possible.

3.7.5 Setting the Exposure

Set the exposure value manually to compensate for unusual lighting conditions such as
indirect indoor lighting, dark backgrounds, and strong backlighting.

3.7.6 Setting the AEB

Sets the auto exposure bracketing (AEB) to shoot 3 continuous images, each with a different
exposure setting: correctly exposed, underexposed, and overexposed.
mode. Then, point the camera at
[Custom WB]
Using the Camera
to confirm
OK
13