Camera Power Connections; Connecting Devices - First Alert DVR0405 User Manual

PRODUCT OVERVIEW
CAMERA AND POWER CONNECTIONS
Installing Cameras
Mounting Cameras and Running Cable
Select the position for the camera and secure the camera stand. Screw the camera onto the stand. Adjust camera to the proper
view angle. Make sure the lens is upright relative to the subject. Tighten the thumb bolt. First Alert cameras can be either ceiling or
wall mounted by simply reversing the camera stand mounting. See "Camera Orientation" Info box. Holes are provided on both the
top and bottom of the camera housing to accommodate most mounting requirements. Run cable from camera to DVR location. See
Information box below on "Longer Cable Runs".
Camera - Wall Mounted

Connecting Devices

Follow this diagram to make device connections. Note, some devices are
not included with this kit. See "What's in the Box" for included devices.
DVR Front Face
Connect Mouse &
USB Drive
5 Way Splitter -
4 camera/
1 Power
Power
from 120V
DC Converter - 12V
Camera - Ceiling Mounted
RCA Audio In from Audio
Smartphone
Cameras or Powered
through Mobile
Internet Setup
(Smartphone Not
included)
RJ45 Ethernet
to Router and
Internet
Power to Cameras
DVR are required, you will need to upgrade to RG59 Coax cable. We
provide several lengths up to 300 feet. In addition, if you need to run
cable for in-wall installations, then you may require fire rated cable,
FT-4/CMR UL approved for in-wall installations.
RCA Audio Out to
Powered Speakers
Microphone
(Not included)
Power to DVR
Page 12
Camera Orientation
It's important the camera is mounted correctly to
ensure the image is not upside down as the cam-
era lens can only be positioned one way.
Longer Cable Runs
Longer cable runs may require an upgrade to
RG59 Coax cable. First Alert kits ship with eco-
nomical AV cable that is designed to work well up
to the length of cable provided, usually around
60 feet. If longer distances between camera and
(Not included)
VGA to PC Monitor or TV
BNC to Security Camera Monitor
(Not included)
PTZ & Alarm
Connections
(Cameras not
included)
Video to DVR
Channels 1-4
AV Cable: BNC/
DC Power
(1 per Camera)
Video to Camera
Power to Camera