Answer Delay; Remote Access; Switch Remote Access On/Off - BT STUDIO PLUS 5500 User Manual

Answer delay

Answer delay sets the number of times your BT Studio Plus
5500 will ring before the answering machine picks up your call.
The default setting is 6 rings. You can change this setting from
between 2-9 rings or to time saver mode.
1. Press the button, the display shows
2. Press or
to select.
3. Press or
4. Press or
(2-9)or
TiMe SaVer
5. Press and hold to return to standby.

Remote access

You can operate your answering machine remotely from any
Touchtone™ phone by calling your BT Studio Plus 5500 and
entering a 4-digit security code.

Switch remote access on/off

1. Press the button, the display shows
2. Press or
to select.
3. Press or
4. Press or
press .
5. Press and hold to return to standby.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com
anS Machine
until is displayed and press
anS SeTTingS
to display
anSWer DelaY
to select the number of rings you want
and press .
anS Machine
until is displayed and press
anS SeTTingS
to display
reMOTe acc
to choose either or
On
, press .
and press .
, press .
and press .
and
OFF
If you have a voice mail service e.g.
1571 please ensure that the ring
delay is set to answer before the
voicemail service. Therefore, the
ring delay should be less than on
the voicemail if you want the
Studio Plus 5500 answer machine
to answer calls.
37