Answer Delay; Remote Access; Switch Remote Access On/Off - BT Concero 1500 User Manual

Answer delay

Answer delay sets the number of times your BT Concero 1500 will
ring before the answering machine picks up your call. The default
setting is 5 rings. You can change this setting from between 2-9
rings or to time saver mode.
1. Press the button, the display shows
2. Press or until
to select.
3. Press or to display
4. Press or to select the number of rings you want
(2-9)or
TiMe SaVer
5. Press and hold to return to standby.

Remote access

You can operate your answering machine remotely from any
Touchtone™ phone by calling your BT Concero 1500 and entering
a 4-digit security code.

Switch remote access on/off

1. Press the button, the display shows
2. Press or until
to select.
3. Press or to display
4. Press or to choose either
press .
5. Press and hold to return to standby.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp
anS Machine
is displayed and press
anS SeTTingS
anSWer Delay
and press .
anS Machine
is displayed and press
anS SeTTingS
and press
reMOTe acc
or
On
, press .
and press .
, press .
.
and
OFF
If you have a voice mail service e.g.
1571 please ensure that the ring
delay is set to answer before the
voicemail service. Therefore, the
ring delay should be less than on
the voicemail if you want the
BT Concero 1500 answer machine
to answer calls.
37