HP MSM720 Specification page 26

QuickSpecs
Accessory Product Details
HP 1-port Power Injector
(J9407B)
Services
Physical characteristics
Environment
Electrical characteristics Voltage
Safety
Emissions
Notes
Services
DA - 13271 Worldwide — Version 18 — December 20, 2013
For supported platforms and minimum software requirements to support this
product, see the document titled "Support for the HP BX Transceivers" on the
"HP Mini-GBICs and SFPs" Manuals Web page.
The J9143B connects to the J9142B "downstream" transceiver, or to any IEEE-
standard 1000BASE-BX10-D ("downstream") device. (A 1000-BX-U
transceiver can only connect to a 1000-BX-D product. You cannot connect two
1000-BX-U transceivers together.)
Power consumption is 1 watt maximum.
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
Dimensions
Weight
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Current
Frequency
Notes
UL 60950; EN 60950
EN 55024; EN 55022 (CISPR 22) Class B with FTP Cabling; FCC Part 15, Class B
with FTP cabling
The 1-port power converter has 1 AC power cord input, 1 RJ-45 10/100/1000
Mbps port for data coming from the network infrastructure, and 1 RJ-45 for
data plus IEEE 802.3af-compliant PoE for Gigabit Ethernet to power the
access point.
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP MSM Controller Series
www.hp.com/networking/services
5.71(d) x 2.36(w) x 1.22(h) in. (14.5 x 6 x 3.1 cm)
1 lb. (0.45 kg)
32°F to 104°F (0°C to 40°C)
5% to 93%, noncondensing
-4°F to 158°F (-20°C to 70°C)
5% to 95%, noncondensing
up to 10,000 ft. (3 km)
100-240 VAC
0.3/0.2 A
50/60 Hz
IEEE 802.3af compliant
www.hp.com/networking/services
for details on
for details on
Page 26