Set Date And Time Manually - BT HUDSON 1500 User Manual

Set date and time manually

1. Press Menu, scroll
press SeleCt.
is highlighted. Press SeleCt.
2.
Set DAte/tiMe
The current date and time setting is displayed.
3. Use the keypad to enter the correct time (using the 24 hour
mode) and date. Press
4. Press until you return to standby.
BACk
Your BT Hudson 1500 is ready for use.
If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp
to and
CloCk & AlArM
to confirm.
ok
Automatic date and time setting
Providing you have subscribed to
your network's Caller Display service,
the date and time is set automatically
for all handsets when you receive
your first call.
The date and time is recorded with
each answering machine message
you receive.
If you do not have a Caller Display
service you can set the date and
time manually.
Change Time & Date format
You can set the time format to the 12
or 24 hour clock but when changing
the clock you must enter using the
24 hour mode i.e. for 2.30pm enter
14:30. You can also change the date
format to present the day or the
month first, see page 26.
Multi-handsets
When setting the time and date on
one handset, any other handsets
registered to the base are also
updated automatically.
If the time or date format is adjusted
then only the handset being used will
be updated, all others will need to be
changed independently if required.
8